IMPORTANCE OF ASSESSING THE POSITION OF THE INFRA-ORBITAL FORAMEN IN QUAD ZYGOMA OR UNILATERAL DOUBLE ZYGOMA IMPLANT SURGERY.

AIM: Evaluate the frequency of occurrence of extreme inferior positioning of the Infraorbital foramen from the infra-orbital rim that can potentially interfere with the placement of Quad or Unilateral Double Zygomatic implants. MATERIALS AND METHODS: CBCT scans of 60 patients were read to identify the Infraorbital foramen (IOF)and Infra-orbital rim (IOR). The distances between the two were measured. In cases with increased values, virtual surgical planning was done to evaluate whether two Zygoma implants could be placed in one zygomatic bone. RESULTS: Two out of the 60 cases showed a more inferior location of the IOF, reducing the amount of bone available , thus rendering quad zygoma or unilateral; double zygomatic implants infeasible. CONCLUSION: Measurement of the distance of the IOF from the IOR is an important step worth incorporating in Quad Zygoma or unilateral double zygoma implant surgery planning.

Lateral Tarsoplasty Combined with a Full-Thickness Skin Graft for Managing Severe Lower Eyelid Ectropion Following the Subciliary Approach for Infra-Orbital Rim Fracture: A Retrospective Observational Study.

Subciliary incision is a common approach for facial fracture surgery; however, it has a higher incidence of lower lid ectropion, which can be particularly challenging for beginning surgeons to manage. This study reports the usage of lateral tarsoplasty combined with a full-thickness skin graft (FTSG) to correct severe ectropion following the subciliary approach for infra-orbital rim fractures. We retrospectively reviewed all facial fracture cases involving infra-orbital rim fractures through a subciliary approach treated in our department between March 2021 and May 2023. Electronic medical records and clinical digital photographs of patients who met the inclusion criteria were reviewed. After reviewing 196 cases that used the subciliary approach, we found 6 patients (3.06%; 4 males and 2 females; mean age, 68.5 ± 4.89 years) with postoperative severe ectropion managed using lateral tarsoplasty and FTSG. The mean ectropion development and correction times after facial fracture surgery were 0.78 ± 0.24 and 0.91 ± 0.37 months, respectively. At the 12-month follow-up, all patients showed favorable outcomes, and the position of their lower eyelids was well maintained without ectropion recurrence. Based on these successful outcomes, lateral tarsoplasty combined with FTSG is proposed to be an effective and straightforward method for managing lower eyelid ectropion caused by facial fracture surgery.

Evaluation of Different Fixation Methods Combinations After L-Shaped Osteotomy Reduction Malarplasty: An In Vitro Biomechanical Study.

BACKGROUND: This in vitro study compared the stability of different fixation method combinations for the zygomatic complex after simulated L-shaped osteotomy reduction malarplasty, a common facial contouring surgery in East Asia with high postoperative complications due to poor fixation methods. MATERIALS AND METHODS: The study used 108 zygoma replicas with various fixation methods combinations in the zygomatic body (L-shaped plate with short wing on zygoma and on the maxilla, two bicortical screws, one bicortical screw with L-shaped plate, square plate, and rectangular plate) and zygomatic arch (Mortise-Tenon structure, 3-hole plate, and Mortise-Tenon structure plus short screw). The failure force under incremental load was applied through the Instron tensile machine to a well-stabilized model using a rubber band simulating the masseter muscle and recorded the increasing force digitally. ANOVA test was used for comparison between recorded values (P < 0.05). RESULTS: The results showed that the most stable combination was a six-hole rectangular plate and a Mortise-Tenon structure plus one short screw (358.55 ± 51.64 N/mm2). The results also indicated that the placement vector of the fixation methods around the L-shaped osteotomy and the use of the two-bridge fixation method were important factors in enhancing the stability of the zygomatic complex. CONCLUSION: The study suggested that surgeons should choose appropriate fixation methods based on these factors to reduce postoperative complications and improve surgical outcomes. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

All-on-4 concept with the use of zygoma implants for rehabilitation in the severely atrophied maxilla with a definitive immediate restoration.

This case report of a 45-year-old patient at initial presentation shows an illustration of the limitations of periodontal maintenance therapy and the subsequent implant prosthetic therapy. In close consultation with the patient, treatment strategies were adopted to maximize the preservation of prognostically questionable teeth. Eight years later, the patient had a highly atrophied maxilla that could be successfully restored with implants. This was achieved with two zygoma implants and two anterior conventional implants, which were immediately loaded according to the All-on-4 concept and immediately provided with a definitive prosthetic restoration. The case report demonstrates to the general practitioner that using zygoma implants in such constellations may offer a solution to achieve a fixed, rapid, and financially acceptable prosthetic rehabilitation.

Guided placement of zygomatic implants in head and neck cancer patients: implant survival and patient outcomes at 1-3 years of follow-up.

Zygomatic implants (ZI) are a valuable option for supporting an obturator prosthesis after maxillary resection. This study was performed to assess the clinical outcomes of a digitally validated guided technique for ZI placement, followed by immediate prosthetic obturation. The primary objective was to evaluate implant survival, while the secondary objective was to assess patient-reported quality of life post-rehabilitation. Twelve patients treated for head and neck cancer received a total of 36 ZI after ablative surgery. The mean duration of ZI follow-up was 30.1 months. The survival rate of ZI placed in non-irradiated patients was 100%, while it was 85% in irradiated patients. Patient-reported outcomes were evaluated using the Liverpool Oral Rehabilitation Questionnaire (LORQv3) and the University of Washington Quality of Life Questionnaire (UW-QOL v4). Most patients reported satisfactory outcomes in the oral function domain of the LORQv3 (mean score 17.7 ± 4.5; possible range 12-48, with lower scores indicating better outcomes). Regarding the UW-QOL v4, the swallowing and chewing domains had the highest scores (mean 97.5 ± 8.7 and 95.8 ± 14.4, respectively; maximum possible score of 100). In conclusion, this treatment approach improves function and quality of life after maxillary ablative surgery. However, irradiated patients showed a noticeable trend of higher implant failure, and this was influenced by tumour position and size impacting the radiation dose to the zygomatic bone.

Balancing beauty and science: a review of facial implant materials in craniofacial surgery.

Facial reconstruction and augmentation, integral in facial plastic surgery, address defects related to trauma, tumors infections, and congenital skeletal deficiencies. Aesthetic considerations, including age-related facial changes, involve volume loss and diminished projection, often associated with predictable changes in the facial skeleton. Autologous, allogeneic, and alloplastic implants are used to address these concerns. Autologous materials such as bone, cartilage, and fat, while longstanding options, have limitations, including unpredictability and resorption rates. Alloplastic materials, including metals, polymers, and ceramics, offer alternatives. Metals like titanium are biocompatible and used primarily in fracture fixation. Polymers, such as silicone and polyethylene, are widely used, with silicone presenting migration, bony resorption, and visibility issues. Polyethylene, particularly porous polyethylene (MedPor), was reported to have one of the lowest infection rates while it becomes incorporated into the host. Polyether-ether-ketone (PEEK) exhibits mechanical strength and compatibility with imaging modalities, with custom PEEK implants providing stable results. Acrylic materials, like poly-methylmethacrylate (PMMA), offer strength and is thus mostly used in the case of cranioplasty. Bioceramics, notably hydroxyapatite (HaP), offer osteoconductive and inductive properties, and HaP granules demonstrate stable volume retention in facial aesthetic augmentation. Combining HaP with other materials, such as PLA, may enhance mechanical stability. 3D bioprinting with HaP-based bioinks presents a promising avenue for customizable and biocompatible implants. In conclusion, various materials have been used for craniofacial augmentation, but none have definitively demonstrated superiority. Larger randomized controlled trials are essential to evaluate short- and long-term complications comprehensively, potentially revolutionizing facial balancing surgery.

Role of finite element analysis for selection of single point fixation in zygomaticomaxillary complex fracture.

BACKGROUND: One-point fixation was superior to the two and three-points fixation in minimally displaced zygomaticomaxillary complex (ZMC) fracture regarding the cost, invasiveness, scaring, number of wounds, and operation time. Accordingly, this study aimed to predict which one-point fixation is the most stable in managing minimally displaced ZMC fracture. MATERIAL & METHODS: This study simulated the different one-point fixation approaches on three ZMC models after fracture reduction and application of all forces exerted on the fractured area. The findings were represented as stress impact on the ZMC fracture and plating system as well as the inter-fragments micro-motion. RESULTS: The von misses stresses of plates for the zygomaticofrontal, infra-orbital rim, and zygomaticomaxillary buttress model were (66.508, 1.285, and1.16 MPa) respectively. While the screws' von misses for the infraorbital rim, zygomaticofrontal, and zygomaticomaxillary buttress models were (13.8, 4.05, and 1.60 MPa) respectively. Whereas, the maximum principles stress at zygomaticofrontal, zygomaticomaxillary buttress, and infraorbital rim models were (37.03, 37.01, and 34.46 MPa) respectively. In addition, the inter-fragment micro-motion for zygomaticomaxillary buttress, infraorbital rim, and zygomaticofrontal models were (0.26, 0.25, and 0.15 mm) respectively. CONCLUSION: One-point fixation at zygomaticomaxillary buttress is the preferred point because it is exposed to low stresses, and the inter-fragment micro-motion is within the approved limit with the elements in the same direction of fixation which indicates the rigid fixation. In addition, it is less palpable and scarless. TRIAL REGISTRATION: clinical trial.gov (NCT05819372) at 19/04/2023.

Peri-zygomatic complications on zygomatic implants with or without penetrating the external surface of zygoma: A 2-year retrospective study.

OBJECTIVES: The main purpose of this retrospective study was to assess the difference in the incidence of peri-zygomatic complications (PZCs) when zygomatic implants (ZIs) penetrate or do not penetrate the external surface of zygoma. MATERIALS AND METHODS: This study included 32 patients with edentulous maxillae or potentially edentulous maxillae undergo zygomatic implantation. The patients were divided into the penetration group (P-group) and the non-penetration group (N-group) according to whether the apex of implants penetrated the external surface of zygoma in postoperative CBCT. The extension length, the penetration section of the implants, and the skin thickness at the corresponding position were simultaneously measured. Clinical follow-up was conducted regularly until 2 years after surgery. The occurrence of PZCs (including peri-zygomatic infection, skin numbness, non-infectious pain, and foreign body sensation) was recorded. A mixed effect logistic model was used to compare the difference of complication rate between the P-group and the N-group, and odds ratio (OR) was calculated. Then identify the impact of the extension length, penetration section and skin thickness in P-group with the same model. RESULTS: A total of 71 ZIs were implanted in 32 patients, including 37 implants in the P-group and 34 implants in the N-group. During the 2-year follow-up, a total of 13 implants occurred PZCs, with an overall complication rate of 18.3%. Thereinto, the incidence rate was 29.7% in the P-group, and 5.9% in the N-group (OR = 6.77). In P-group, there was a significant difference in complication rate of different extension lengths, while the penetration section and skin thickness had no statistical significance on the complication rate. CONCLUSION: Under the limitation of this study, to minimize the risk of PZCs, ZI should be placed in a manner that avoids the apex penetrating the external surface of the zygoma.

Long-term survival and complications of Quad Zygoma Protocol with Anatomy-Guided Approach in severely atrophic maxilla: A retrospective follow-up analysis of up to 17 years.

INTRODUCTION: The objective of the study was to provide long-term clinical outcomes and complications in the severely atrophic edentulous maxillae treated by means of the quad zygoma protocol (QZP) using the Anatomy-Guided Approach (AGA). METHODS: This was a retrospective cohort study of all consecutive patients with severely atrophic edentulous maxilla and insufficient bone height and width in the anterior and posterior regions bilaterally, who underwent rehabilitation with the QZP between May 2006 and December 2021. All patients were followed for at least 1 year. All zygomatic implants (ZIs) were placed by the same surgeon. The primary endpoint of the study was the implant survival rate. Secondary endpoints were implant success rate, prosthesis success rate, complications, and Oral Health-Related Quality of Life using the OHIP-14 questionnaire. RESULTS: A total of 56 patients (men 16, women 40) with 224 ZIs (Nobel Biocare, n = 204; Straumann, n = 16; Southern Implant, n = 4) placement were included with a mean follow-up period 8.8 ± 3.9 years (range, 1.2-17.0). The survival (success) rate was 97.7%. Five ZIs in four patients failed. The mean time between implant placement and failure was 8.6 years (range, 0.5-13.3). All patients received immediate loading with acrylic prosthesis. The successful rates for the definitive prosthesis were 98.2%. Forty-two patients received posterior cantilever for rehabilitation of fixed definitive prosthesis. Local orofacial inflammation (35.7%) and Sinusitis (12.5%) were the most common complications, occurring at a mean follow-up of 10.0 (range, 4.2-14.9) and 10.3 (range, 4.3-16.2) years, respectively. In 48 patients, the mean score of the OHIP-14 questionnaire was 1.7 ± 2.6 with the follow-up period of 9.0 ± 4.1 years. CONCLUSIONS: The rehabilitation of severely atrophic edentulous maxilla using the QZP has shown a predictable and high survival rate in the long term. The implementation of an immediate loading protocol offers potential benefits in stabilizing ZIs with cross-arch stabilization. Moreover, the use of a posterior cantilever in reconstruction can effectively establish functional occlusion through well-distributed ZIs, eliminating the need for additional implant placement.

Técnica quirúrgica con Zigoma quad con carga inmediata en maxilar atrófico: a propósito de un caso / Surgical technique with quad Zygoma with immediate loading in an atrophic maxilla: a case report

Introducción: En la actualidad existen técnicas quirúrgicas predecibles y reproducibles para los tratamientos en pacientes con atrofias de rebordes maxilares, los implantes cigomáticos son unas de las alternativas. El trabajo interdisciplinario entre el rehabilitador oral y el cirujano maxilofacial es fundamental para el éxito de la rehabilitación del paciente. El presente caso clínico reporta un paciente de sexo femenino de 60 años, sin antecedentes médicos, donde se observa en el conebean atrofia del reborde alveolar por lo que se planifica cuatro implantes cigomáticos. Objetivo: El objetivo del informe clínico es mostrar una alternativa de tratamiento quirúrgico implantologico en paciente con maxilar atrofiado. Resultados: Los resultados demostraron la eficacia de los implantes cigomáticos en pacientes edéntulos con atrofia del reborde alveolar más la colocación de una prótesis inmediata. Conclusión: Unas de las alternativas de tratamiento en maxilares con rebordes atróficos son la colocación de implantes cigomáticos junto a una buena planificación digital. varios estudios han descrito que la tasa de éxito de estos implantes es muy alta, debido a que la técnica es segura, reproducible y genera alta satisfacción en los pacientes. (AU)

Introduction: At present there are predictable and reproducible surgical techniques for treatments in patients with maxillary rim atrophy, zygomatic implants are one of the alternatives. The interdisciplinary work between the oral rehabilitator and the maxillofacial surgeon is fundamental for the success of the patient's rehabilitation. The present clinical case reports a 60 year old female patient, with no medical history, where atrophy of the alveolar ridge was observed in the conebean and four zygomatic implants were planned. Objective: The objective of the clinical report is to show an alternative implantological surgical treatment in a patient with atrophied maxilla. Results: The results demonstrated the efficacy of zygomatic implants in edentulous patients with alveolar ridge atrophy plus immediate prosthesis placement. Conclusion: One of the treatment alternatives in maxillae with atrophic rims is the placement of zygomatic implants together with a good digital planning. Several studies have described that the success rate of these implants is very high, due to the fact that the technique is safe, reproducible and generates high patient satisfaction, (AU)

Intraosseous Hemangioma of Zygoma: A Case Report with Review of Literature.

Intraosseous hemangiomas are uncommon and account to less than 1% of all osseous tumors. Vertebral body and skull are the most common sites involved. However involvement of facial bones is rare with zygoma being even rarer site. Due to its rarity it creates diagnostic dilemma clinically and radiologically. Its vascular nature carries the risk of intraoperative bleeding hence an accurate preoperative diagnosis with arterial embolization helps to avoid the dire consequences. Fine needle aspiration cytology along with radiological correlation is extremely helpful in such cases. We report such rare case in forty eight years female patient with brief review of literature.

Single-stage computer-assisted approach for tumour resection and functional restoration of Brown class III maxillary defects-titanium mesh and zygomatic implants combined with vascularized anterolateral thigh flap.

The functional restoration of Brown class III maxillary defects is a challenging endeavour in oral and maxillofacial surgery. Conventional reconstruction techniques with osseous free flaps have certain limitations, such as the need for multiple operations and greater patient morbidity. This study introduces a single-stage computer-assisted approach for tumour resection and functional restoration of these defects using titanium mesh, zygomatic implants, and a vascularized anterolateral thigh flap (ALTF). Virtual surgical planning was used to simulate tumour resection, titanium mesh placement, and zygomatic implant insertion. Surgery was performed under the guidance of mixed reality and surgical navigation. The tumour was resected by total hemimaxillectomy, and the reconstruction was performed using a pre-bent patient-specific titanium mesh for the orbital floor and two zygomatic implants placed and exposed through tunnels in an ALTF. The ALTF survived without any perioperative complications. A fixed prosthesis with built-in titanium frame was delivered 4 months postoperatively. At the 1-year follow-up, there was no tumour recurrence, the implants were osseointegrated, and aesthetics and masticatory function were satisfactory. An occlusal force of 155 N was attained on the reconstructed side, compared to 127 N on the non-surgical side.

Intraosseous venous malformation of the zygoma: Case report and pooled analysis.

The objective of this study is to provide a comprehensive summary of the clinical and radiological features of zygomatic intraosseous venous malformations (IVM), as well as its treatment strategies. The aim is to establish preoperative diagnostic bases that will aid in the identification of zygomatic IVM and facilitate the implementation of effective treatment. Four cases of pathologically diagnosed zygomatic IVM with typical clinical and radiological features were reported. They exhibited comparable clinical and radiological features, and the En bloc excision and reconstruction yielded satisfactory outcome. Pooled data analysis was performed with additional 74 cases collected from 63 previous studies. The results revealed a higher incidence of zygomatic IVMs in middle-aged females, with swelling, pain and ocular dysfunction being the typical clinical manifestations. The characteristic radiological features of these lesions were well-defined, round bony structures with specific internal trabecular patterns. A diagnostic flow-chart assisting the differential diagnosis of IVM was established. En bloc excision was deemed the most advantageous treatment option, as it presented minimal risk of haemorrhaging and no instances of recurrence. The decision to pursue reconstruction was contingent upon the extent of the defect. Alloplastic material has emerged as the most frequently employed reconstruction material in recent reports. The summarized characteristics of zygomatic IVM and the proposed diagnostic and treatment strategies, derived from the pooled analysis of reported cases, may help to improve diagnosis and management in further clinical practice.

Quantitative assessment of image artifacts from zygoma implants on CBCT scans using different exposure parameters.

This study was aimed at quantifying artifacts from zygoma implants in cone-beam computed tomography (CBCT) images using different exposure parameters. Two cadaver heads, one with two zygoma implants on each side and the other for control, were scanned using 18 different exposure parameters. Quantitative analysis was performed to evaluate the hypodense and hyperdense artifact percentages calculated as the percentage of the area. Hyperdense artifacts and hypodense artifacts were detected, followed by the calculation of the hyperdense and hypodense artifact percentages in the image. In the qualitative analysis of the artifacts, the scores used were as follows: absence (0), moderate presence (1), or high presence (2) for hypodense halos, thin hypodense lines, and hyperdense lines. Artifact analysis was performed qualitatively and quantitatively using the post-hoc Tukey and Two-way ANOVA tests. As a result, in the qualitative analyses, zygoma implants showed a significant difference compared to the control group with regard to hyperdense and hypodense artifacts (p < 0.05). There was a significant difference between the means according to the FOV size arithmetic averages (p < 0.05). In terms of voxel size, the difference was found to be significant, where 400 microns showed the highest hypodense artifact while 200 microns showed the lowest hypodense artifact. In conclusion, hypodense and hyperdense artifacts were significantly higher in cadavers with zygoma implants than in controls. As FOV and voxel size increase, more hypodense artifacts are produced by zygoma implants so smaller FOV and voxel sizes should be used to prevent poor image quality of adjacent teeth.

Long-term treatment outcomes with zygomatic implants: a systematic review and meta-analysis.

PURPOSE: The purpose of this study was to perform a systematic review with meta-analysis on the long-term survival rates of zygomatic implants (ZI). ZI success, prostheses survival and success, sinus pathology and patient reported outcomes were also investigated. METHODS: Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines were followed. Embase and OvidMedline databases were searched alongside the grey literature. The systematic review was recorded in PROSPERO (CRD42022358024). Studies reporting titanium/titanium alloy ZI survival data, ZI-supported prosthesis data, ZIs directly compared to any other implant therapy including grafted sites, a minimum follow-up time of 3 years and a minimum number of 10 patients were included. All study designs were considered if they met the inclusion criteria. Studies not involving ZIs, ZIs not made from titanium/titanium alloy, a follow-up time of < 3 years or < 10 patients, animal studies and in vitro studies were excluded. Long-term follow-up has not been defined in the literature. A minimum of 3 years follow-up was considered acceptable to capture survival after initial healing, alongside in-function prosthesis data via delayed or immediate load protocols. ZI success, was predominantly defined as ZI survival without biological or neurological complications. Meta-analyses were performed for ZI survival, ZI failure incidence, ZI success, loading protocol, prosthesis survival, and prevalence of sinusitis using random effects models. Descriptive analysis was used for ZI success, prosthesis success and patient reported outcome measures. RESULTS: Five hundred and seventy-four titles were identified, of which 18 met the inclusion criteria. Eligible studies included 1349 ZIs in 623 patients. Mean follow-up period was 75.4 months (range 36-141.6). The mean survival of ZIs was 96.2% [95% CI: 93.8; 97.7] at 6 years. Mean survival for delayed loading was 95% [95% CI: 91.7; 97.1] and 98.1% [95% CI: 96.2; 99.0] for immediate loading (p = 0.03). Annual incidence rate of ZI failure was 0.7% [95% CI 0.4; 1.0]. Mean ZI success was 95.7% [95% CI 87.8; 98.6]. Mean prosthesis survival was 94% [95% CI 88.6; 96.9]. Sinusitis prevalence was 14.2% [95% CI 8.8; 22.0] at 5 years. Patients' reported increased satisfaction with ZIs. CONCLUSIONS: ZIs have long-term survival comparable to conventional implants. Immediate loading showed a statistically significant increase in survival over delayed loading. Prosthesis survival was similar to that of prostheses supported by conventional implants, with similar complications. Sinusitis was the most frequently encountered biological complication. Patients reported improved outcome measures with ZI use.

A deep learning-based automatic segmentation of zygomatic bones from cone-beam computed tomography images: A proof of concept.

OBJECTIVES: To investigate the efficiency and accuracy of a deep learning-based automatic segmentation method for zygomatic bones from cone-beam computed tomography (CBCT) images. METHODS: One hundred thirty CBCT scans were included and randomly divided into three subsets (training, validation, and test) in a 6:2:2 ratio. A deep learning-based model was developed, and it included a classification network and a segmentation network, where an edge supervision module was added to increase the attention of the edges of zygomatic bones. Attention maps were generated by the Grad-CAM and Guided Grad-CAM algorithms to improve the interpretability of the model. The performance of the model was then compared with that of four dentists on 10 CBCT scans from the test dataset. A p value <0.05 was considered statistically significant. RESULTS: The accuracy of the classification network was 99.64%. The Dice coefficient (Dice) of the deep learning-based model for the test dataset was 92.34 ± 2.04%, the average surface distance (ASD) was 0.1 ± 0.15 mm, and the 95% Hausdorff distance (HD) was 0.98 ± 0.42 mm. The model required 17.03 s on average to segment zygomatic bones, whereas this task took 49.3 min for dentists to complete. The Dice score of the model for the 10 CBCT scans was 93.2 ± 1.3%, while that of the dentists was 90.37 ± 3.32%. CONCLUSIONS: The proposed deep learning-based model could segment zygomatic bones with high accuracy and efficiency compared with those of dentists. CLINICAL SIGNIFICANCE: The proposed automatic segmentation model for zygomatic bone could generate an accurate 3D model for the preoperative digital planning of zygoma reconstruction, orbital surgery, zygomatic implant surgery, and orthodontics.

Evaluation of sub-brow approach to the frontozygomatic suture for Open Reduction and Internal Fixation (ORIF) of Zygomatico maxillary complex (ZMC) fractures: A prospective cohort study.

Introduction: Contemporary incisions used to access the frontozygomatic (FZ) sutures are the lateral brow and upper blepharoplasty incisions which are associated with specific limitations and complications. The authors describe the use of sub-brow incision as an alternate approach for exposure of the FZ region. Methods: This is a prospective cohort study involving patients requiring surgical management of zygomatico maxillary complex (ZMC) fractures with fixation at FZ suture alone or along with fixation at infra-orbital rim and/or zygomaticomaxillary buttress. A sub-brow incision was used to expose the fracture and fixation was done with a 4-hole miniplate. The parameters evaluated were specific to the FZ region (sub-brow incision), namely surgical access, bleeding, fracture exposure time, post-operative scar, and pain. Each patient was reviewed on 1st, 5th, 7th, 10th, 30th, and 90th day. Results: The study sample included eight male patients. The mean age was 30 years. The sub-brow incision demonstrated favorable postoperative outcomes; adequate exposure was achieved in all 8 patients. The scar formation was found to be higher on the 7th day and the least scar formation was seen by the third month. The mean pain score was found to be high on first post-operative day and the least pain was seen by the 10th day. The mean score of surgical field bleeding was found to be 1.75 which signified mild bleeding according to Fromme's scale. The mean time taken for adequate exposure of the fracture was 6.62 min. All the assessment parameters were statistically significant (P value <0.01). Conclusion: Sub-brow incision is an effective approach for ORIF of zygomatic fractures at FZ suture. The technique is quick, simple, and associated with minimal complications.

C-Arm a Useful Tool for Surgeons in Reduction of Zygomatic Complex Fracture: A Comparative Study: Article Type-Original Research.

Introduction: Reduction of zygomaticomaxillary (ZMC) fracture is often difficult to evaluate intraoperatively because of it peculiar anatomy and limited accessibility. The purpose of this study is to evaluate the efficacy of use of C-arm as a tool for intraoperative monitoring of ZMC fracture reduction. Materials and Methods: Group I (C-Arm) and Group II (control group) comprised of patients with isolated unilateral displaced Zygomatic complex (ZMC) fractures and having orbital volume change. The efficacy of use of C-arm intra-operatively was evaluated to analyse the reduction of fracture. Results: It was observed that mean change in ocular volume was around 1.07cm2 for Group I and 1.51cm2 in Group II. Thus post-operative eye volume was near to normal in Group I than Group II. The change in ocular volume post-operatively was observed to be statistically significant (p-value < 0.05) in both the groups. Post HOC Tukey statistical analysis determined the intergroup relation in change in eye volume between normal, pre- and post-operative and was found to be statistically significant (p-value < 0.05). The intergroup comparison between Group I and Group II was done using ANOVA statistical analysis and was found to be statistically significant (p-value < 0.05). Discussion: Our study revealed that C-arm is definitively an effective tool in the oral and maxillofacial surgery armamentarium, giving better results with minimal surgical exposure and by eliminating operator related error. Supplementary Information: The online version contains supplementary material available at 10.1007/s12070-022-03221-y.

Indications for zygomatic implants: a systematic review.

PURPOSE: The purpose of this systematic review was to assess the evidence regarding the indications for placement of zygomatic implants to rehabilitate edentulous maxillae. MATERIAL AND METHODS: A focused question using the PIO format was developed, questioning "in patients in need of an implant-supported rehabilitation of the edentulous maxillae, what are the indications for the use of zygomatic implants''. The primary information analyzed and collected was a clear description of the indication for the use of zygomatic implants. RESULTS: A total of 1266 records were identified through database searching. The full-text review was conducted for 117 papers, and 10 were selected to be included in this review. Zygomatic implant indications were extreme bone atrophy or deficiency secondary to different factors. The quad zygoma concept (two zygomatic implants bilaterally placed and splinted) was applied to 107 patients, the classic zygoma concept (one zygomatic implant bilaterally placed and splinted to standard anterior implants) was used in 88 patients, and the unilateral concept (one zygomatic implant on one side, splinted with one or more conventional implants) was employed in 14 patients. CONCLUSIONS: The main indication for the use of zygomatic implants was considered extreme maxillary bone atrophy, resulting from many factors. The clear definition of what was considered "extreme bone atrophy" is not uniquely defined in each paper. Further studies are needed to develop clear indications for zygomatic implants.

Surgical Treatment in Patients with Toxic Phosphorus Osteonecrosis of Facial Skull Middle Zone.

During the last few years, in the territory of the Russian Federation, the number of cases of toxic phosphoric osteonecrosis of the jaws has increased against the background of taking drugs of "artisanal" production (pervitin, desomorphin). The aim of our study was to increase the effectiveness of surgical treatment of patients with a diagnosis of toxic phosphorus necrosis of the maxilla. We performed a comprehensive treatment of patients with a history of drug addiction and the above diagnosis. Surgical intervention in the volume of complete resection of pathologically altered tissues and reconstructive techniques using local tissues and a replaced flap made it possible to achieve good aesthetic and functional results in the early and late postoperative period. Thus, our proposed method of surgical treatment can be used in similar clinical situations.